INNDSTART(8)              InterNetNews Documentation              INNDSTART(8)


       inndstart - Start innd


       inndstart [-P port] [-I address] [innd-options]


       The purpose of inndstart is to raise system file descriptor limits,
       open the privileged news transfer port, and then start innd(8), passing
       it the open file descriptor for the news port.  inndstart is used since
       only privileged programs can perform those two operations and since
       innd should not run with elevated privileges.  It is installed setuid
       root and drops privileges to the news user (as set at configure time)
       before running innd.

       Normally there is no need to run inndstart directly.  Instead, run as the news user, and it will handle running inndstart
       appropriately for you.

       Since inndstart is setuid root, it is extremely restrictive about who
       can run it and what it is willing to do.  See "SECURITY" for the full

       inndstart can only be run by the news user; if run by any other user,
       it will abort.  It will also only bind to ports 119, 433, or a port
       number given at configure time with --with-innd-port among those ports
       below 1024, although it can bind to any port above 1024.  This is to
       prevent various security exploits possible by binding to arbitrary
       privileged ports.

       Before running innd, inndstart cleans out the environment and sets only
       those environment variables listed in "ENVIRONMENT".


       -P port
           Bind to port instead of whatever is specified by port in inn.conf.
           Note that this is subject to the constraints mentioned above.

       -I address
           Bind as address instead of whatever is specified by bindaddress in
           inn.conf.  The default behavior is to bind to INADDR_ANY, and
           that’s what’s desired almost all the time.  This option, and the
           inn.conf parameter, may be useful if the machine has multiple
           interface cards and innd should only be listening on a particular

       All other options given on the command line are passed verbatim to
       innd.  In addition, inndstart will give the -p option to innd, specify-
       ing the file descriptor of the open network socket.


       inndstart is setuid root, and therefore an expected point of attack.
       It has therefore been carefully written with security in mind.  In a
       normal INN installation, it is installed setuid root and executable
       only by users in the news group.

       Ideally, everything about inndstart’s operations would be hard-coded so
       that it could not be modified.  Fighting against this desire, however,
       is the ideal that as much of INN’s operation as possible should be con-
       figurable at run-time using inn.conf, and the news system should be
       able to an alternate inn.conf by setting INNCONF to the path to that
       file before starting any programs.  The configuration data therefore
       can’t be trusted.

       The security model used is:

       · inndstart can only be executed by the news user and news group, as
         determined at configure time and compiled into inndstart as con-
         stants.  Similarly, inndstart will always setuid() and setgid() to
         those users before running innd.  This is to prevent a user other
         than news but in the news group from using inndstart to leverage that
         access into access to the news account.

       · As mentioned above, inndstart will only bind to a very limited subset
         of ports below 1024.  There are various attacks that can be performed
         using random low-numbered ports, including exploits of the rsh(1)
         family of commands on some systems.

       · inndstart does as little as possible as root, dropping privileges
         before performing any operations that do not require elevated privi-

       This program therefore gives the news user the ability to revoke system
       file descriptor limits and bind to the news port, and nothing else.


       inndstart may log the following messages to syslog and print them to

       can’t bind: %s
           (Fatal) Unable to bind to the designated port.  This usually means
           that something else is already running on the news port.  Check
           with netstat(8) and make sure that inetd(8) doesn’t think it’s run-
           ning a service on the same port you’re trying to run innd on.

       can’t bind to restricted port %d
           (Fatal) inndstart was told to bind to a low numbered port (under
           1024) other than 119, 433, or a port number given at configure
           time.  This is not allowed for security reasons.  If you’re running
           innd on a port other than 119 or 433, you need to give the
           --with-innd-port flag to "configure" when you compile INN.

       can’t exec %s: %s
           (Fatal) inndstart was unable to execute innd.  Make sure that path-
           bin is set correctly in inn.conf and that innd is located in that
           directory and is executable by the news user.

       can’t getgrnam(%s)
           (Fatal) Unable to determine the GID for the compiled-in news group.
           Perhaps the news group is not listed in /etc/group.

       can’t getpwnam(%s)
           (Fatal) Unable to determine the UID for the compiled-in news user.
           Perhaps the news user is not listed in /etc/passwd.

       can’t open socket: %s
           (Fatal) Something went wrong in creating the network socket.
           Chances are your system is out of resources of some kind.

       can’t set file descriptor limit to %d: %s
           (Warning) Unable to set the system file descriptor limit to the
           specified value; the limit was left unchanged.  Perhaps that value
           is too high for your system.  Try changing rlimitnofile in inn.conf
           to a smaller value.

       can’t set SO_REUSEADDR: %s
           (Warning) inndstart attempts to set SO_REUSEADDR using setsock-
           opt(2) so that if innd exits, it can be restarted again immediately
           without waiting for the port to time out.  For some reason, this
           failed, and that option was not set on the port.

       can’t seteuid to %d: %s
           (Fatal) Unable to change the effective UID.  If inndstart has the
           correct permissions (setuid root) and seteuid to root (UID 0) is
           failing, this may mean that your system has seteuid(2) but doesn’t
           have support for POSIX saved UIDs.  If this is the case, please
           report this to the INN maintainers.

       can’t setgid to %d: %s
           (Fatal) Dropping privileges to the news group failed for some rea-

       can’t setgroups (is inndstart setuid root?): %s
           (Warning) Dropping all supplemental groups except the news group
           failed for some reason, and the process group membership was left
           unchanged.  This almost always indicates that inndstart isn’t
           setuid root as it has to be to do what it does.  Make sure that
           inndstart is setuid root, owned by group news, and mode 4710.

       can’t setuid to %d: %s
           (Fatal) Dropping privileges to the news user failed for some rea-

       invalid address %s
           (Fatal) -I was specified on the command line, but the argument
           wasn’t a valid address.  Addresses must be given as numeric IP

       invalid bindaddress in inn.conf (%s)
           (Fatal) The bindaddress specified in inn.conf could not be con-
           verted to an IP address.  See inn.conf(5) for more information
           about valid values.

       invalid port %s (must be a number)
           (Fatal) -P was specified on the command line, but the argument
           wasn’t a valid port.  Ports must be port numbers; service names are
           not allowed.

       missing address after -I
           (Fatal) -I was given on the command line, but no address was given
           after the option.

       missing port after -P
           (Fatal) -P was given on the command line, but no port was given
           after the option.

       must be run by user %s (%d), not %d
           (Fatal) Someone other than the news user attempted to run innd-
           start.  inndstart may only be run by the news user for security


       Normally, inndstart is never run directly.  However, a simple way to
       just restart innd (if it is not running) without running any other aux-
       illiary programs or performing any of the other checks done by is to just run:


       as the news user.

       To start innd on port 433, passing it the "-c21" option, use:

           inndstart -P433 -c21


       One environment variable affects the operation of inndstart itself:

       INNCONF The full path to the inn.conf(5) file to read, rather than the
               default.  This can be used to run multiple copies of INN on the
               same machine with different settings.

       When executing innd, inndstart cleans out the entire environmnent and
       sets only the following variables:

               Passed verbatim from inndstart’s environment.  This is used by
               various programs to override the bindaddress parameter in
               inn.conf and therefore must be in innd’s environment for pro-
               grams like innfeed(8).

       HOME    Set to pathnews from inn.conf.

       LOGNAME Set to the news master, as determined at configure time.

       PATH    Set to pathbin from inn.conf, pathetc from inn.conf, and then
               /bin, /usr/bin, and /usr/ucb in that order.

       SHELL   Set to the path to the system Bourne shell as determined by
               configure (probably /bin/sh).

       TMPDIR  Set to pathtmp from inn.conf.

       TZ      Passed verbatim from inndstart’s environment.

       USER    Set to the news master, as determined at configure time.


           Read for pathnews, pathbin, pathtmp, rlimitnofile, bindaddress, and

           The binary that is executed as innd and passed the open network


       Written by Russ Allbery <> for InterNetNews.

       $Id: inndstart.8,v 1.6 2002/12/03 05:31:10 vinocur Exp $


       inn.conf(5), innd(8)

INN 2.4.0                         2002-12-03                      INNDSTART(8)

Man(1) output converted with man2html