Ppmtoxpm User Manual(0)                                Ppmtoxpm User Manual(0)


       ppmtoxpm - convert a PPM image to an X11 pixmap


       ppmtoxpm       [-name=xpmname]      [-hexonly]      [-rgb=rgb-textfile]
       [-alphamask=pgmfile] [ppmfile]

       Minimum unique abbreviation of option is acceptable.  You may use  dou-
       ble  hyphens  instead  of single hyphen to denote options.  You may use
       white space in place of the equals sign to separate an option name from
       its value.


       This program is part of Netpbm(1).

       ppmtoxpm reads a PPM image as input and produces X11 pixmap (version 3)
       as output.  This format can be loaded by the XPM library.

       In the XPM output, colors may be identified by name, such as "Red",  or
       in  hexadecimal,  for  example  "#FF0000".   In the hexadecimal format,
       there may be from 1 through 4 hexadecimal digits per RGB component.

       By default, ppmtoxpbm tries to find a name for each color in the  image
       in  the  system color dictionary , and if it finds one, uses it.  If it
       doesn’t it uses hexadecimal.  You can force ppmtoxpbm to use  hexadeci-
       mal  only  with the -hexonly option.  You can specify a different color
       dictionary with the -rgb option.

       When ppmtoxpm uses the hexadecimal format for identifying a  color,  it
       uses  the  one that uses the least number of hexadecimal digits that it
       takes to represent the maxval of the input PPM.  E.g. if the maxval  of
       the  input  PPM  is  100,  ppmtoxpm  uses 2 digits per component, as in

       Some programs do not properly handle one-digit-per-component  hexadeci-
       mal  color  specifiers.   They see the wrong colors.  To produce an XPM
       that such a program can handle, make sure the maxval of the  input  PPM
       is greater than 15, such as by running it through pnmdepth 255.

   Color Code Lengths - Image Size
       In  the  XPM format, there is a palette (’color map’) that assigns each
       color in the image to a unique sequence of printable characters  called
       a  color  code, and a raster that identifies the color of each pixel of
       the image with one of those color codes.  The length of the color  code
       affects the size of the image stream.

       All  color codes in an image are the same length, and ppmtoxpm tries to
       make it as short as possible.  That length is, of course, determined by
       the  number  of colors in the image.  ppmtoxpm counts the colors in the
       image, excluding those that will be transparent in the  output  due  to
       your  alpha  mask,  and chooses a color code length accordingly.  There
       are 92 printable characters that can be used in a color  code.   There-
       fore,  if  you  have  92  or fewer colors, your color codes will be one
       character.  If you have more than 92 but not more than 92  *  92,  your
       color codes will be two characters.  And so on.

       There’s  one  exception to the above: If you specify an alpha mask (the
       -alpha option, one unique color code represents ’transparent.’  This is
       true  even  if  the alpha mask doesn’t actually produce any transparent
       pixels.  So subtract one from the number of possible colors if you  use


              This  option  specifies  the prefix string which is specified in
              the resulting XPM output.  If you don’t use  the  -name  otpion,
              ppmtoxpm  defaults  to  the  filename (without extension) of the
              ppmfile parameter.  If you do not specify -name or ppmfile (i.e.
              your  input  is from Standard Input), the prefix string defaults
              to the string noname.

              This option says never to put color names in the XPM  file,  but
              rather  to identify names by hexadecimal strings that explicitly
              identify RGB component intensities.  This means  the  reader  of
              the  file need not have access to a suitable color dictionary to
              interpret it.

              This option was introduced in Netpbm 10.15 (April 2003).  Before
              that, it was the default, overridden by specifying -rgb.

              This  option  names  the  file in which the color dictionary you
              want to use resides.  By default, ppmtoxpm uses the system color
              dictionary .

              This option in meaningless when you specify -hexonly.

              Before  Netpbm  10.15  (April 2003), ppmtoxpm did not default to
              the system color dictionary.  If you didn’t specify  -rgb,  ppm-
              toxpbm would use only hexadecimal color specifiers.

               This  option names a PGM file to use as an alpha (transparency)
              mask.  The file must contain an image the same dimensions as the
              input  image.   ppmtoxpm  marks  as  transparent any pixel whose
              position in the alpha mask image is at most half white.

              If you don’t specify -alphamask, ppmtoxpm makes  all  pixels  in
              the output opaque.

              ppmcolormask  is  one  way  to generate an alpha mask file.  You
              might also generate it by  extracting  transparency  information
              from an XPM file with the -alphaout option to xpmtoppm.

              There  are  similar options on other Netpbm converters that con-
              vert from formats that include transparency information too.


       ppmcolormask(1), xpmtoppm(1), pnmdepth(1), ppm(1) XPM Manual by  Arnaud
       Le Hors lehors@mirsa.inria.fr


       Copyright (C) 1990 by Mark W. Snitily.

       Permission  to  use, copy, modify, and distribute this software and its
       documentation for any  purpose  and  without  fee  is  hereby  granted,
       provided  that the above copyright notice appear in all copies and that
       both that copyright notice and this permission notice  appear  in  sup-
       porting  documentation.   This  software  is  provided  ’as is’ without
       express or implied warranty.

       This tool was developed for Schlumberger  Technologies,  ATE  Division,
       and  with  their  permission is being made available to the public with
       the above copyright notice and permission notice.

       Upgraded to XPM2 by Paul  Breslaw,  Mecasoft  SA,  Zurich,  Switzerland
       (paul@mecazh.uu.ch), November 8, 1990.

       Upgraded  to  XPM  version  3 by Arnaud Le Hors(lehors@mirsa.inria.fr),
       April 9, 1991.

netpbm documentation              Feb 22 2003          Ppmtoxpm User Manual(0)

Man(1) output converted with man2html