scanadf(1)                                                          scanadf(1)


       scanadf - acquire multiple images from a scanner equipped with an ADF


       scanadf    [-d|--device-name   dev]   [-h|--help]   [-L|--list-devices]
       [-v|--verbose] [-V|--version]  [-o|--output-file  name]  [-N|--no-over-
       write]  [-S|--scan-script  name] [-s|--start-count num] [-e|--end-count
       num] [-r|--raw] [device-specific-options]


       scanadf is  a  command-line  interface  to  control  image  acquisition
       devices which are capable of returning a series of images (e.g. a scan-
       ner with an automatic document feeder (ADF)).  The device is controlled
       via  command-line options.  After command-line processing, scanadf nor-
       mally proceeds to acquire a series of images until the  device  returns
       the SANE_STATUS_NO_DOCS status code.

       The  images are written to output files, specified by the --output-file
       option.  These files are typically written in one of the PNM  (portable
       aNyMaP)  formats  (PBM  for  black-and-white  images, PGM for grayscale
       images, and PPM for color  images).   Several  optional  frame  formats
       and SANE_FRAME_TEXT) are supported.  In each case, the data is  written
       out to the output file as-is without a header.  Unrecognized frame for-
       mats are handled in the same way, although a warning message is printed
       in verbose mode.

       Typically,  the  optional  frame formats are used in conjunction with a
       scan script (specified by the --scanscript option) which is invoked for
       each  acquired image.  The script is provided with a series of environ-
       ment variables which describe the parameters and format  of  the  image

       scanadf  accesses  image  acquisition devices through the SANE (Scanner
       Access Now Easy) interface and can thus support any  device  for  which
       there  exists  a  SANE  backend  (try  "apropos sane-" to get a list of
       available backends).


       The -d or --device-name options must be followed by a SANE device-name.
       A  (partial) list of available devices can be obtained with the --list-
       devices option (see below).  If no device-name is specified explicitly,
       scanadf will attempt to open the first available device.

       The  -h or --help options request help information.  The information is
       printed on standard output and in this case, no attempt will be made to
       acquire an image.

       The  -L  or  --list-devices option requests a (partial) list of devices
       that are available.  The list is not complete since some devices may be
       available,  but are not listed in any of the configuration files (which
       are typically stored in directory /etc/sane.d).  This  is  particularly
       the  case  when accessing scanners through the network.  If a device is
       not listed in a configuration file, the only way to access it is by its
       full device name.  You may need to consult your system administrator to
       find out the names of such devices.

       The -v or --verbose options increase the verbosity of the operation  of
       scanadf.   The option may be specified repeatedly, each time increasing
       the verbosity level.

       The -V or --version option requests that scanadf print the program  and
       package  name,  as  well as the version number of the SANE distribution
       that it came with.

       The -o or --output-file option specifies a format string used to gener-
       ate  the  name  of  file  to  write  the image data to.  You can use %d
       replacement in the output file name; this will  be  replaced  with  the
       current page number.  The default format string is image-%04d.

       The  -N  or  --no-overwrite  option  prevents  scanadf from overwriting
       existing image files.

       The -S or --scan-script option specifies the  name  of  script  to  run
       after  each scanned image is acquired.  The script receives the name of
       the image output file as its first  and  only  command  line  argument.
       Additionally  the  scan  script can reference the following environment
       variables to get information about the parameters of the image.

              SCAN_RES - the image resolution (in DPI)
              SCAN_WIDTH - the image width (in pixels)
              SCAN_HEIGHT - the image height (in pixels)
              SCAN_DEPTH - the image bit-depth (in bits)
              SCAN_FORMAT - a string representing the image format (e.g. gray,
              g42d, text, etc)
              SCAN_FORMAT_ID - the numeric image format identifier

       The  -s  or  --start-count  option  specifies  the page number of first
       scanned image.

       The -e or --end-count option specifies the last page  number  to  scan.
       Using  this  option,  you  can request a specific number of pages to be
       scanned, rather than scanning until there are no more images available.

       The  -r or --raw option specifies that the raw image data be written to
       the output file as-is without interpretation.  This disables the  writ-
       ing  of  the PNM header for basic frame types.  This feature is usually
       used in conjunction with the --scan-script option where the scan script
       uses  the environment variables to understand the format and parameters
       of the image and converts the file to a more useful format.  NOTE: With
       support for the optional frame types and the default handling of unrec-
       ognized frametypes, this option becomes less and less useful.

       As you might imagine, much of the power of scanadf comes from the  fact
       that  it can control any SANE backend.  Thus, the exact set of command-
       line options depends on the capabilities of the  selected  device.   To
       see  the  options for a device named dev, invoke scanadf via a command-
       line of the form:

              scanadf --help --device dev

       The documentation for the device-specific options printed by --help  is
       explained in the manual page for scanimage.


              This  directory holds various configuration files.  For details,
              please refer to the manual pages listed below.


       scanimage(1), xscanimage(1), sane(7)


       scanadf is an adaptation by Tom Martone  of  scanimage  by  David  Mos-
       berger,  Andreas Beck, and Gordon Matzigkeit following closely the fea-
       tures of bnhscan by Sean Reifschneider of, ltd.


       Please send reports to

       This program relies on the backend to  return  the  SANE_STATUS_NO_DOCS
       status code when the automatic document feeder is out of paper.  Use of
       this program with backends that do not support ADFs (e.g. flatbed scan-
       ners)  will  likely  result in repeated scans of the same document.  In
       this case, it is essential to use the start-count and end-count to con-
       trol the number of images acquired.

       Only a subset of the SANE backends support feeders and return SANE_STA-
       TUS_NO_DOCS appropriately.  Backends which are known to  work  at  this
       time are:

              sane-bh - Bell+Howell Copiscan II series scanners.
              sane-hp  -  Hewlett  Packard  scanners.   A patch to the sane-hp
              backend is necessary.  The --scantype=ADF option must be  speci-
              fied  (earlier  versions of the backend used the --scan-from-adf
              option, instead).
              sane-umax - UMAX scanners.   Support  exists  in  build  12  and
              later.   The --source="Automatic Document Feeder" option must be

                                  15 Sep 1999                       scanadf(1)

Man(1) output converted with man2html